Table of Contents
Advertisement
Rear panel terminals and controls
Items
8
DC input
9
Headphone jack
10 RF antenna
11 S-Video
Composite video input
12
Audio input
13 SCART
14 Component video input
15 VGA (PC) input
Notes:
Ensure that the power to the LCD TV and other connected devices is off before you make any
connections.
Check and make sure that all AV cables are connected with the corresponding ports correctly.
Connect the DC 12V power cable with DC adapter, which should be
connected to AC power supply. Connect the other end of the DC
power cable with the DC power port on the TV.
Connect the headphones to this jack
The RF output terminal can be connected with the RF input port of
the TV.
The output S-Video terminal of DVD can be connected with the S-
Video input port of the TV through S-Video cable.
The product can receive different signals (the programs send by TV
station) and transfer these signals through AV signal cable to other
audio and video equipments. The AV output of the TV can be con-
nected with the input port of other AV equipment through AV cable.
Connect DVD video player or other device via SCART cable
It's convenient to receive the component video signal of high defini-
tion from DVD player. The output Component (YPbPr) terminal of
DVD can be connected with the Component (YPbPr) input port of the
TV through AV cable.
Connect VGA cable to the PC
7
Connection description
Advertisement
Table of Contents
