Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
Remove the audio board:
Release the ZIF connector to which the audio board cable is connected and disconnect the cable
1.
(1) from the system board.
Remove the Phillips PM2.5×5.0 screw (2) that secures the audio board to the computer.
2.
Lift the rear edge of the audio board (3) and swing it forward until the audio connectors disengage
3.
from the base enclosure.
Remove the audio board (4).
4.
Reverse the above procedure to install the audio board.
Bluetooth module
Description
Bluetooth module (includes Bluetooth module cable)
Before removing the Bluetooth module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Keyboard on page
66)
Switch cover on page
Display assembly on page
Top cover on page
80)
69)
71)
Component replacement procedures
Spare part number
397923-002
89