Display Assembly - Compaq Presario V3500 Maintenance And Service Manual

Display assembly

Description
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (includes microphones)
14.1-inch, WXGA, BrightView display assembly for use only in defeatured computer models with AMD
processors without a camera module
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (includes microphones)
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors without a camera module (does not include microphones)
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors with a camera module (includes microphones)
Before removing the display assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Disconnect the wireless antenna cables from the WLAN module (see
5.
Remove the following components:
6.
Keyboard (see
a.
Switch cover (see
b.
Remove the display assembly:
Close the computer and turn it upside down, with the front toward you.
1.
Battery on page 53).
Keyboard on page 66)
Switch cover on page 69)
Component replacement procedures
Spare part number
448611-001
451163-001
457348-001
457349-001
462761-001
WLAN module on page 57).
71