Pedestal Installation (Washer and Dryer)
Optional 12-in. high storage drawer pedestals with
dividers are available to provide convenience and
extra storage space for detergent, dryer sheets and
other cleaning supplies. The pedestal installation kit
includes 4 support pads, 4 mounting screws, and 4
leveling legs with locknuts.
Kit Contents
4 Support Pads
4 Mounting Screws
4 Leveling Legs
with Locknuts
Tools Needed
Phillips-head Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8-mm Socket Wrench
WARNING: Due to the size and weight of the
washer or dryer, and to reduce the risk of personal
injury or damage, 2 people are required for proper
installation.
Note:
•
DO NOT remove washer shipping bolts prior to
pedestal installation. Shipping bolts MUST be
reinstalled, if previously removed.
•
Care should always be taken when laying
the washer or dryer on its side to prevent
component damage.
•
Do not lay washer or dryer on its back. Use a
pad or protective surface when laying washer or
dryer on its side.
To install the pedestal:
1.
Lay the washer or dryer on its side.
2.
Remove the 4 leveling legs.
– 12 –
Back out and remove
all 4 leveling legs
(Continued Next Page)