GE WBVH6240 Technical Service Manual page 50

14. Remove the Phillips-head screw that holds the
tub ground wire. Remove the ground wire from
the outer tub wire guides.
Ground Wire
15. Remove the top, front top, and bottom
counterweights. (See
16. Remove the 4 dampers from the outer tub. (See
.)
Dampers
17. Compress the dampers and position them
towards the outside of the cabinet.
.)
Wash Basket
18. Lift the outer tub assembly up, then release the
2 suspension springs from the slotted plastic
inserts in the cabinet top braces.
19. Carefully remove the tub assembly out the front
of the cabinet.
Note: When reinstalling the tub assembly, hook
each of the suspension springs in the forward hole
of the outer tub spring mounts.
Insert
Front of Washer
Forward Hole
– 50 –
Suspension Spring
Outer
Tub
Spring
Mount