Table of Contents
Advertisement
Getting Started
Connection Mode
1. The Wi-Fi connection between livOn Player and
smartphone or PC with livOn Controller program can be
made by one of below three modes.
①When playing only the music files stored in MicroSD card
▶ Select "livOn Player AP mode"
②When music files are stored in remote file server*
connected to Internet, and playing it where Wi-Fi is
available such as home, office or public places
▶ Select "Wi-Fi mode"
③When the music files are stored in remote file server*,
and playing it on the road while moving
▶ Select "Hotspot mode"
2. Each connection mode is made via built-in Wi-Fi of livOn
Player. SSID, password and security method are
necessary to configure each mode.
* Music file server : PC or NAS storage server where music files
are stored and connected to Internet.
3. The music files stored in MicroSD card can be played
in any kind of connection mode.
4. One of the three connection modes can be set or all
three modes can be set to switch as required
5. Please refer to the next page for the basic concept of
each connection mode. Also refer to "Primary Setup"
and "Setup" sections in this manual for how to
configure parameters for each mode.
Connection
SD Card
Mode
Hotspot
O
Mode
Wi-Fi
O
Mode
Player AP
O
Mode
Remote
Required
Mobility
Server
Bandwidth
O
O
Middle
O
X
High
X
-
-
9
Advertisement
Table of Contents
