Table of Contents
Advertisement
Getting Started
Charging the Battery
1. The built-in battery can be charged by AC adapter or
USB cable.
2. Charging by AC adapter is faster than charging by
USB cable.
3. For the first time or when the player has not been
used for a long time, please fully charge the battery
before use.
4. Using unapproved AC adapter by HiSonus can cause
problem.
Inserting MicroSD Card
1. MicroSD card insertion is required to store music files
to livOn player.
2. When replacing the MicroSD card, please turn off the
player's power before removing the card.
3. MicroSD card is not included in product package.
4. Please refer to "Playing Music Files" section in this
manual to play music files in MicroSD card.
* The maximum capacity of MicroSD card supported by livOn player is 32GB.
Connecting to PC
1. Settings for initial working environment, upgrading
and device initialization should be done by
connecting the livOn player to PC via USB cable.
2. Please connect livOn player to PC after the boot-up
procedure is completed. This will allow the PC to
recognize livOn player properly.
3. Please refer to related sections in this manual to
setup and manage livOn player by using USB
connection with PC.
Status LED
Categories
Status
AC adapter connected
Power Off
Charging
Fully charged
Booting Boot progressing
Hotspot Mode
Working
Wi-Fi Mode
Mode
AP Mode
Recovery Mode
Battery
Insufficient Battery
LED
Remark
Blue
Blinking
non-blinking
White
Green
Blinking :
Violet
Connecting...
Yellow
Cyan
Special Mode
Red, blinking
7
Advertisement
Table of Contents
