Using The Player; Start - HiSonus livOn HSP-M1 User Manual

Using the Player

Start

1. In order to play music files and control the player by smartphone, the Wi-Fi connection between smartphone and
livOn Player should be made first, and then execute livOn Controller app.
2. In case of controlling by PC, the USB connection can be used instead of Wi-Fi or wired-Ethernet connection.
(surely, Hotspot mode cannot be used.)
3. The connection progress of livOn Player is described below, and refer to "Connection Mode" section in this
manual for understanding more in detail about each connection mode.
Hotspot mode(LED Green)
Activate "Personal Hotspot" in smartphone.
(refer to "Setup Personal Hotspot" section)
The blinking of LED is stopped when the
connection is successfully made.
If the blinking is not stopped after a while,
please re-configure Player with correct
SSID and password of your smartphone's
personal hotspot and try again.
Below is for how to check current setup.
Tip for checking or changing current setup when the Wi-Fi connection fails !
Connect PC and Player with USB cable, or force the Player to enter AP mode as below and connect with smartphone.
Press Volume+ and Volume- buttons simultaneously till the LED is changed to yellow. Connect to Player with your smartphone and
change the setup. After finishing, please re-select original connection mode that you had setup. (refer to "Setup" section in this
manual.)
18
Wi-Fi mode(LED Violet)
The blinking of LED is stopped when the
connection is successfully made.
If the blinking is not stopped after a while,
please change Wi-Fi configuration to valid
one or select another Wi-Fi and try again.
Your smartphone should be connected to
the same Wi-Fi AP.
Below is for how to check current setup.
livOn Player AP mode(LED Yellow)
The LED is not blinking in Player AP mode.
Search and select the SSID of livOn Player in
your smartphone's available Wi-Fi lists.
If the SSID of livOn Player is not found,
please check the configuration of livOn
Player.
Below is for how to check current setup.