Table of Contents
Advertisement
Primary Setup
1. First of all, the connection mode should be set after installing Controller Program to use livOn Player.
2. Turn on the livOn Player, and then connect livOn Player to PC by using USB cable after completion of booting
process. (LED is changed from white to other color) Please keep this sequence to prevent possible error.
3. Run livOn Controller Program on PC. The three steps of "Primary Setup" wizard is displayed.
4. The "Primary Setup" wizard is prepared to enter the parameters for three connection modes. Please refer to
"Connection Mode" section in this manual for understanding each mode.
5. Unnecessary step, connection mode, can be skipped, but at least one of them should be set with real parameters
for using livOn Player.
Step 1.
This step is for entering parameters for "Hotspot
Mode" of livOn Player.
Please enter the SSID(Wi-Fi hotspot name), password
and security method in the settings of "Personal
Hotspot" mode of your smartphone.
Please refer to "Setup Personal Hotspot" section for
how to make your smartphone a "Personal Hotspot".
If you do not need this mode, just skip.
15
Advertisement
Table of Contents
