EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws Husqvarna 445, 445e and 450e from 2007's serial numbers and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11681-1:2004
Notiﬁed body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certiﬁcates for
EC type examination in accordance with annex VI, have the numbers: 404/07/1194 - 445, 445e, 404/07/1206 - 450e.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certiﬁed conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certiﬁcates have the numbers: 01/161/068 - 445, 445e, 01/161/067 - 450e.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 10 October 2007
Bengt Frögelius, Development director chainsaw R&D
115 13 81-26 Rev.3 2009-01-14
English – 41