•
The availability of this feature is depending on the contract with your telephone company.
•
System programming is required. Consult your dealer.
•
It is impossible to seize any other CO line during ISDN Call Hold.
•
After completing the ISDN Call Transferring service, the CO line will be released. You
cannot return to the held call.
•
If you go on-hook except for while hearing ringback tone or during a conversation
with the third party, ISDN Call Hold will be canceled and the system will hold the call.
•
To return to the conversation before the destination answers, press TRANSFER
(DPT), Recall (SLT), or R key (ISDN Extn.).
•
It is possible to make a call by using One-Touch Dialling. If the dialled number starts with
0, 81, 82, or 83, these numbers will be disregarded automatically, even in the case that it
is not a line access number.
•
If your extension has been restricted, you might not be able to transfer a call to an
external party. Restricted will be displayed, and you will hear reorder tone.
•
Least Cost Routing (LCR) will not be applied to the call dialled after 5 .
•
The number dialled after 5
(SMDR). The charge fee will be counted inclusively as the original call you made or you
receive.
If the destination is busy or you misdial
DPT/SLT/ISDN Extn.
While hearing a busy tone or other tone
On-hook.
To split the calls
DPT
During ISDN Call Hold
TRANSFER
Press TRANSFER.
User Manual
will not be recorded to Station Message Detailed Recording
(CO)
OR
Press CO or off-hook.
SLT
During ISDN Call Hold
Press Recall.
Talk.
(Recall)
ISDN Extn.
During ISDN Call Hold
Press R key.
Operation
91