Panasonic KX-TD612E User Manual page 55

Calling an external party
Any Outside Telephone
In Non Security Mode
DISA
phone no.
Enter DISA
phone number.
In Trunk Security Mode
DISA
phone no.
Enter DISA
phone number.
In All Security Mode
DISA
phone no.
Enter DISA
phone number.
• *1: If you dial a wrong DISA user code, dial
• If you enter a wrong DISA user code 3 times, the line will be disconnected automatically.
• In case a destination of Intercept Routing is not assigned, the call which was made by DISA
function will be disconnected automatically when it is over a programmed time period.
• If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing 1 digit number (0-9) according to the outgoing message.
• You can select either to direct a call to the pre-programmed Intercept Routing destination
or to disconnect it without respect to the pre-programmed Intercept Routing destination
(default: direct the call to the pre-programmed Intercept Routing destination) when a caller
dials nothing for the pre-determined period of time (default: 5 s later) after hearing DISA
OGM. System Programming is required. Consult your dealer.
User Manual
line access
no.
DISA OGM
Enter line
access number
(9 or 81-84).
line access
no.
DISA OGM
Enter line
access number
(9 or 81-84).
DISA user
code
DISA OGM
Enter pre-assigned
DISA user code
(4-10 digits).
phone no.
D.Tone
Enter phone
number of the
external party.
DISA user
code
D.Tone
Enter pre-assigned
DISA user code
(4-10 digits).
1
line access
no.
D.Tone
Enter line
access number
(9 or 81-84).
and try again from this point.
Operation
1
phone no.
D.Tone
Enter phone
number of the
external party.
phone no.
D.Tone
Enter phone
number of the
external party.
55