1.
Entering the programming mode (The default of user password is 1234. Ask your dealer.)
PROGRAM
Press PROGRAM.
2.
Programming
programme no.
Enter programme
number (3 digits).
•
To delete or change an entry, press CLEAR (TRANSFER).
•
To confirm your entry after storing data:
—The STORE button light: Lights red.
—Confirmation Tone:
1 beep: Your entry is accepted.
3 beeps: Your entry is rejected.
•
To exit the programming mode at any time, lift the handset.
3.
Exiting the mode
User Manual
Dial
.
Enter user password.
SKP +
Press SKP+.
your entry
NEXT
Press NEXT.
Enter your entry
user password
SKP –
OR
To continue programming
Press SKP-.
STORE
Press STORE.
To continue entering selections
NEXT
PREV
OR
Press NEXT.
Press PREV.
SELECT
Press SELECT.
To go to the next/previous programme or entry
To enter the desired programme or entry
Customising Your Phone & System
To end
END
Press END.
209