Customising Your Phone & System
If you do not know the jack/extension number
PROGRAM
Press PROGRAM.
Confirmation
To confirm your entry after storing data;
•
The STORE button light: Lights red.
•
Confirmation Tone:
— 1 beep: Your entry is accepted.
— 3 beeps: Your entry is rejected.
Icon Descriptions
Icons are given to guide you through programming. The following is an example of how the icons may
be used:
X
X
Procedure
The basic steps are shown below.
208
9
9
6
1
1
Dial 996.
Enter the programme number. (xxx= the specified number)
X
Press the corresponding button on the telephone or the Soft button which
corresponds to the display.
<Example>
NEXT
: "NEXT" is displayed.
In this case, both of the following methods are available:
•
Press the NEXT (
•
Press the Soft button which corresponds to "NEXT" shown on the display.
(
The display messages "SEL+, SEL- and SEL" mean "SELECT".
"CLR" means "CLEAR".
Press the button until the desired entry appears.
Enter your selection.
<Example>
jack no.
After confirming
END
Press END.
NEXT
) button.
NEXT
)
: "Jack no." is displayed. Enter the jack number.
PROGRAM
Press PROGRAM.
User Manual