Leaving A Hunting Group (Log-In/Log-Out) - Panasonic KX-TD612E User Manual

Operation

2.6.6 Leaving a Hunting Group (Log-In/Log-Out)

You can set your status in a hunting group. Set Log-
Out when you leave the office so that incoming calls
will temporarily skip your extension in the hunting
type. When you return, set Log-In so that calls will
reach your extension. (Default: Log-In)
Hunting Group
A hunting group is a group of extensions organised in
such a way that if the first destination is busy, the next
destination is hunted until an idle destination is found.
The order (hunting type) is assigned in a system
programming. Consult your manager.
DPT/SLT
Off-hook.
• The Log-In/Log-Out button alternates the setting between Log-In and Log-Out modes. The
button light shows the current status as follows:
Off: Log-In mode
Red on: Log-Out/Other use
Flashing red: a call waiting
Customising Your Phone
4.1.3 Customising the Buttons
Create or re-arrange a Log-In/Log-Out button.
120
FENOH: Floating Extension Number of Hunting Group
0
OR
4 5
1
1
Dial 45. Dial 0 to log-out
or 1 to log-in.
log in
Log-Out Log-Out FENOH
OR
Log-In Log-In
Enter the FENOH
or dial
log out
Specific
All
C.Tone
for all.
User Manual
On-hook.