NETGEAR N150 User Manual page 68

Fill in the fields as follows:
4.
Port. The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports.
For each port, the screen displays the following:
Status. The link status of the port.
TxPkts. The number of packets transmitted since reset or manual clear.
RxPkts. The number of packets received since reset or manual clear.
Collisions. The number of collisions since reset or manual clear.
Tx B/s. The current line utilization—percentage of current bandwidth used.
Rx B/s. The average line utilization.
Up Time. The time elapsed since the last power cycle or reset.
ADSL Link Downstream or Upstream. The statistics for the upstream and downstream
DSL link. These statistics are of interest to your technical support representative if you
have problems obtaining or maintaining a connection.
Connection Speed. Typically, the downstream speed is faster than the upstream speed.
Line Attenuation. The line attenuation increases the farther you are physically located
from your ISP's facilities.
Noise Margin. The signal-to-noise ratio, which is a measure of the quality of the signal on
the line.
Poll Interval. The interval at which the statistics are updated in this window. Click the
Stop button to freeze the display.
In the Router Status screen, select the Connection Status button to display a screen similar
5.
to this:
N150 Wireless ADSL2+ Modem Router DGN1000
Network Maintenance
68