Front Panel - NETGEAR N150 User Manual

Front Panel

The wireless modem router front panel has the nine status LEDs and icons shown in the
figure. Note that the Wireless and WPS icons are buttons.
Power
LAN ports
Figure 4. Front panel LED Icons
The tables below describe the LEDs, icons, and buttons on the front panel from left to right.
Table 1. Power On/Off button
Icon LED Activity
Solid green
Solid red
Off
Restore factory
settings
Table 2. LAN LED
Icon LED Activity
Solid green
Blinking green
Off
N150 Wireless ADSL2+ Modem Router DGN1000
Wireless on/off button
DSL Internet
Description
Power is supplied to the router.
POST (power-on self-test) failure or a device malfunction has occurred.
Power is not supplied to the router.
Light blinks momentarily when the Restore Factory Settings button on the
bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
three times when the Restore Factory Settings button is released and then
turns green as the gateway resets to the factory defaults.
Description
The LAN port has detected an Ethernet link with a device.
Data is being transmitted or received.
No link is detected on this port.
Hardware Setup
10
WPS On/Off button
WPS
Wireless