NETGEAR N150 User Manual page 11

Table 3. DSL LED
Icon LED Activity
Solid green
Blinking green
Off
Table 4. Internet LED
Icon LED Activity
Solid green
Solid red
Blinking green
Off
Table 5. Wireless Button and LED
Icon LED Activity
Solid green
Blinking green
Icon is on the
Off
Wireless
button
Table 6. WPS Button and LED
Icon LED Activity
Solid green
Blinking green
Icon is on the
Off
WPS button
N150 Wireless ADSL2+ Modem Router DGN1000
Description
You have a DSL connection. In technical terms, the DSL port is
synchronized with an ISP's network-access device.
Indicates that the wireless modem router is negotiating the best possible
speed on the DSL line.
The unit is off or there is no IP connection.
Description
You have an Internet connection. If this connection is dropped due to an
idle time-out but the DSL connection is still present, the light stays green. If
the Internet connection is dropped for any other reason, the light turns off.
The Internet (IP) connection failed. See
for troubleshooting information.
Data is being transmitted over the DSL port.
No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Description
There is wireless connectivity.
Data is being transmitted or received over the wireless link.
There is no wireless connectivity. You can still plug an Ethernet cable into
one of the LAN ports to get wired connectivity. See
on page 33 for more information about the use of this button.
Connectivity
Description
Indicates that wireless security has been enabled.
WPS-capable device is connecting to the device.
WPS is not enabled. See
for more information about the use of this button.
Hardware Setup
11
No Internet Connection
Turn Off Wireless
Wi-Fi Protected Setup (WPS) Method
on page 88
on page 35