NETGEAR N150 User Manual page 67

LAN Port (Local Ports).
MAC Address. The wireless modem router LAN port Ethernet MAC address.
IP Address. The wireless modem router LAN port IP address. The default is
192.168.0.1.
DHCP. If Off, the wireless modem router does not assign IP addresses to PCs on the
LAN. If On, the wireless modem router does assign IP addresses to PCs on the LAN.
IP Subnet Mask. The IP subnet mask used by the wireless modem router LAN. The
default is 255.255.255.0.
Modem.
ADSL Firmware Version. The version of the firmware.
Modem Status. The connection status of the modem.
DownStream Connection Speed. The modem receives data from the DSL line at
this speed.
UpStream Connection Speed. The modem transmits data to the DSL line at this
speed.
VPI. The Virtual Path Identifier setting.
VCI. The Virtual Channel Identifier setting.
Wireless Port. See
settings.
Name (SSID). The Wi-Fi network name (service set ID) for the wireless network.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless
LED on the front panel is off.
Broadcast Name. Indicates if the wireless modem router is configured to broadcast
its SSID.
Select the Show Statistics button on the Router Status screen to display a screen similar to
3.
this:
N150 Wireless ADSL2+ Modem Router DGN1000
Wireless Settings Screen
Network Maintenance
67
on page 37 for a description of these