Connecting The Rs-232 Cable To A Host Computer; Setting Up The Vcd 7500 Vehicle Cradle; Installing The Vcd 7500 Cradle - Symbol PDT 7500 Series Product Reference Manual

Connecting the RS-232 Cable to a Host Computer

1. Plug an RS-232 serial cable into the communication port located on the back of the
CRD 7500 Single-slot cradle, or on the right end of the four-slot cradle.
2. Connect the other end of the cable to the serial (COM) port of the host computer.

Setting Up the VCD 7500 Vehicle Cradle

This section provides the procedures for setting up the VCD 7500 Vehicle Cradle.

Installing the VCD 7500 Cradle

To install the vehicle cradle:
Figure 3-5. RS-232 Communication Port
Cradle Setup and Operation
RS-232 Communication Port
(Single-Slot Cradle)
RS-232 Communication Port
(Four-slot Cradle)
3-7