Sundance Spas 680 Series Owner's Manual page 63

B. Connecting Your Apple device/MP3 Player Using the USB:
1. Locate the USB port in the stereo locker (Figure B).
2. Locate the 30-pin cable provided for compatible devices (Figure C)
or a cable provided with your device.
3. Connect the USB end of the cable into the USB connection on
stereo.
4. Connect the 30-pin end of the cable to the Apple device/MP3 Player
(purchased separately), Figure D.
5. After connecting the cable to both devices, set the player into the
rubber holding base, Figure E.
Note: This also charges most compatible Apple devices when
connected.
USB
AUX
Figure B
CAUTION
EQUIPMENT DAMAGE!
Never install, remove or operate any electrical device (e.g.
Apple device/MP3/USB/AUX/Bluetooth) while hands are wet
or while sitting partially or fully immersed in the spa!
Note: The DRM (Digital Rights Management) Files cannot be played
on this deck. Personal files (MP3, WMA, iTunes or AAC) can be
played as long as they are not DRM encrypted.
C. Operating USB/MP3/Apple device
1. Turn power "ON" to the stereo unit. Turn power "ON" to the remote.
2. The LCD screen on the remote will display the following: "Welcome,"
"USB," "Load," "Apple" (final display will vary depending on the
device connected). All functions are performed through the remote.
3. While the music is playing the remote screen will display and
continually scroll through the following: Artist, Album, Song and Track
information.
4. For operational functions refer to the "External Media Device
Playback" section.
Figure C
(device purchased
:
RISK OF ELECTRICAL SHOCK OR
Figure D
separately)
680 SERIES
USB
AUX
ACCESSORY CONNECTED
Figure E
Page 57