Ubee DDW366 User Manual page 59

Ubee Interactive
Steps
To set up a DMZ host:
1. Connect a PC to an Ethernet port on the DDW366. Make sure both devices are
powered on and functioning.
2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet
port on the DDW366.
3. Log in to the DDW366 Web user interface.
4. Click Advanced from the main menu.
5. Click DMZ Host from the left side menu.
6. Enter the IP address of the Home Gateway (host device) to be exposed to the WAN.
7. Test the device to ensure Internet access is available and the device is functional. For
example, connect to the Internet from a PC connected to the Home Gateway.
DMZ Address
Apply
Ubee DDW366 Dual-Band-Concurrent Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines the IP address of the host to be exposed.
Saves changes.
Using the DMZ Host Option
Description
55