Using The Battery - Sanyo PRO-700 User Manual

Using the Battery

Installing the Battery
1. Insert the battery into the opening on the back of the phone,
making sure the connectors align. Gently press down to
secure the battery.
2. Replace the battery cover into position (see below), and
slide it upward until you hear a click.
3. Lock the battery cover by sliding the latch into its locked
position.
2
Removing the Battery
Warning! Do not handle a damaged or leaking Li-Ion battery as you can be
burned.
1. Make sure the power is off so that you do not lose any
stored numbers or messages.
2. Slide the battery cover latch into its unlock position, and
slide the battery cover downward to remove it.
3. Lift up the battery and remove it from the phone.
1
*This phone image is of PRO-200.
*This phone image is of PRO-200.
9