Table of Contents
Advertisement
Note: When neither party has the floor during a 10-4 call, "Floor is open."
appears on the display. If no one takes the floor for 20 seconds, the 10-4 call
ends automatically.
Tip: If you press
Call)" on page 103, you can make a standard voice call.
Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a group entry,
which you have in your 10-4 List. You can communicate with
up to five members at a time.
1. Press
10-4
2. Press
Go to
want to make a Group call (Company Grps. or Personal Grps.)
and press
3. Highlight the group entry you want to call, and press and
hold
10-4 calling... and Connecting... followed by "You have floor."
Continue with the 10-4 call as described previously.)
To make a 10-4 call to a group member, select your
desired group, highlight your desired group member,
and press and hold
If one of the group members takes the floor, you will
see the member's name and 10-4 number on the
display.
4. When the call is finished, press
Tip: The phone beeps if you press
You can also make a Group Call after checking the group member. Press
to display group members, highlight Call Group and press and hold
during step 3 above.
To redial your last 10-4 call, highlight Redial and press and hold
from the 10-4 List.
104
or
during step 3 of "Making a 10-4 Call (1-to-1
(left softkey) or
(left softkey), and select the list from which you
.
to place the call and take the floor. (You will see
to access the 10-4 List.
.
.
when another party has the floor.
Advertisement
Table of Contents
