Sanyo PRO-700 User Manual page 58

Hide thumbs Also See for PRO-700:
Table of Contents

Advertisement

Unlocking Your Phone
1. From standby mode, press
2. Enter your lock code.
Changing the Lock Code
1. From the Security Menu (see "Accessing the Security
Menu" on page 53), select Change LockCode.
2. Enter and re-enter a new lock code.
Calling in Lock Mode
Even when your phone is locked, you can make calls to 911,
Customer Service, and to special numbers without entering
the lock code. (For information on special numbers, see
"Using Special Numbers" on page 55.)
Note: You can call only emergency numbers while Voice is set to Locked in
Restrict and Lock (see "Locking Voice Calls" shown below).
Locking Voice Calls, Internet and 10-4 Services
With this feature, you can block access to the Internet,
incoming and outgoing voice calls (except 911), or 10-4 calls.
1. Select
2. Select Voice, Internet, or 10-4.
Voice: Enter your lock code, and then select Lock.
Internet: Enter your lock code.
10-4: Select Off and Lock, and then enter your lock code.
3. Select Locked. (Select Unlocked to deactivate this feature.)
Tip: To avoid accidental Internet connections, you can use the Net Guard
feature (see page 134).
54
> Settings > More... > Restrict and Lock.
(left softkey).
Unlock

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-200

Table of Contents