Scale Operation (Optional) - Barton RCL-4002 Operation Manual

Once installed, the scale becomes a permanent part of the Ready Care Lift.
To weigh a patient:
1. Hang the appropriate sling on the hanger ensuring that the sling does not touch
the floor.
Push the ON button to power the scale. There will be a display of 0-0-0-0
2.
across the window. The scale should automatically stop on zero (0.0). If not,
push the ZERO button to achieve zero weight.
3. Proceed to lift the patient and the weight will be displayed. While the patient is
moving, the displayed weight will fluctuate. Once the patient is steady, the
displayed weight will settle.
4. Choose weight display in kilograms or pounds by pushing the KG/LB switch.
5. The display of weight will disappear after approximately 1 minute. Should the
display disappear before you have observed it, simply push the ON button to
display again.

SCALE OPERATION (OPTIONAL)

DO NOT PUSH THE "ZERO" BUTTON AGAIN
UNTIL YOUR NEXT PATIENT
24