Loading In A Seated Position - Barton RCL-4002 Operation Manual

If the user is seated in a wheelchair, make sure the wheelchair is in a locked position
before proceeding. If the user is in bed, either bring the head of the bed to the upright
position or follow the procedure for loading in a recumbent position.
1
3
5

LOADING IN A SEATED POSITION

2
4
6
1. Stand behind or to the side of the user
and hold the sling with the smooth side
facing the user's back.
2. Work the sling down the back, leaving
the top of the commode aperture at the
base of the spine.
- If the user leans back, use your
shoulder and upper arm to lean the
user forward.
- If the user wears a seatbelt, thread
the leg bands of the sling under the
belt.
Use the side and back handles to pull the
sling square around the shoulders and
centered along the spine.
3. Move to the front of the user, raise each
leg in turn and pull the leg band flat
underneath the thigh.
4. Position the legs.
5. Lower the carry bar, making sure to
avoid contact with the user's head.
Attach each strap to the closest hook.
Position the body by choosing the
appropriate loops. If the user wears a
seatbelt, ensure that all straps are
securely attached and that the user's
head is away from the carry bar.
6. Lift the user.
11