Placing And Removing The Battery Pack - Barton RCL-4002 Operation Manual

PLACING AND REMOVING THE BATTERY PACK

Metal Slot on Electronics
Pack Mounting Frame.
Metal Tab on Battery
Pack sits inside.
Placing the Battery Pack on the Lift
To place the battery on the electronics pack, hold the
battery pack by the top handle and place your other
hand on the side of the pack.
Position the metal tabs on the back of the battery
pack into the metal slots on the electronics pack
mounting bracket. Once in position, push the battery
pack down, so the plug on the electronics pack sits in
the battery pack.
Removing the Battery Pack from the Lift
To remove the battery pack, grab the battery pack
handle on the top of the pack and place your other
hand on the side of the pack. Lift the pack up so it
clears the plug on the electronics pack. Once clear of
the plug, pull the pack away from the slots on the
electronics pack mounting frame.
Metal Tab on back of
Battery Pack
20
Battery Pack Handle
Electronics Pack Plug
For Battery