Using Shared Storages By Smb/Cifs Method For Windows - Digitus DN-13020 User Manual

4.4

Using Shared Storages by SMB/CIFS Method for Windows

1. Connect a USB storage device to this product.
2. Select My Network Places.
3. Click Display the Computers of Workgroup.
4. Double click Microsoft Windows Network icon.
5. Double click the Workgroup that the Server belongs to. The default Workgroup name is
"WORKGROUP". You can refer to Control Center or the Server's web pages to get it.
You will see that the Server is displayed as its server name.
6. If you cannot find Workgroup name of the Server in Microsoft Windows Network, you can
select Search for Computer... in My Network Places and enter the Server Name of the
Server to find it.
7. Double click this Server Name icon.
8. If you clear Enable SMB/CIFS Print/File Server Authentication in Supported
Protocols, you login to the SMB server without requiring authentication; otherwise you
have to enter user name and password to login to the Server. You can add user name
and password in User Account box by the Control Center or the Server's Web page.

Note:
If you use SMB on Windows 98 SE/ME, you must login to your Windows 98 SE/ME
using the same user name as in the Server's User Account.
9. The shared folders will be listed as USB1_DyPz, and USB2_DyPz where Dy represents
the y-th disk and Pz represents the z-th partition with respect to USB1 port and USB2
port.
10. Perform Open, Paste, Remove or Copy the files to the shared folders.
26