Digitus DN-13020 User Manual page 19

F. Then try to issue a print job to the desired printer. You will see the Control Center will
automatically do a connect operation. Then, the print job will be issued to that printer.
G. Even you already properly setup an auto-connected printer, the Control Center must be
running (in the background) while a print job is issued. This means you'd better run the
Control Center every time after you login Windows. In order to skip this manual operation,
you can make the Control Center be run automatically after you login Windows. To do this,
choose the "Configuration" item in the "Tools" menu. The following window will appear. Click
on the check box and then on the "OK" button. This feature is enabled by default.
If you would like to break the association between the Windows printer and the physical printer,
just click on the association and click the "Delete" button in the "Auto-Connected Printer List".
19