Using the system
Fig. 108 The air conditioning system: Control elements
Setting temperature
›
Turn the control dial
» Fig. 108
A
›
Turn the control dial
to the left to decrease the temperature.
A
Controlling blower
›
Turn the blower switch
into one of the positions, 1 to 4, to switch the blower
B
on.
›
Turn the blower switch
into position 0 to switch the blower off.
B
›
Press the button
to close the fresh air supply
4
Regulating the air distribution
›
The direction of the inlet air flow is controlled with air distribution regulator
» page
94.
C
Switching the cooling system on and off
›
Press the button
» Fig.
108. The indicator light lights up in the button.
AC
1
›
When you again press the button
off. The indicator light in the button goes out.
Rear window heater
›
Press the button
. Further information
2
Auxiliary heating (parking heating)
›
Press the button
to directly switch on/off the auxiliary heating (auxiliary
3
heating and ventilation). Further information
to the right to increase the temperature.
» Fig.
108.
, the air conditioning system is switched
AC
» page
58.
» page
100.
Note
The whole heat output will be needed to defrost the windscreen and side win-
■
dows. No warm air will be fed to the footwell. This can lead to restriction of the
heating comfort.
The indicator light
lights after activation, even if not all of the conditions for
AC
■
the function of the cooling system have been met
mation. By lighting up of the indicator light in the button, the operational readi-
ness of the cooling system is signalled.
» page
94, Introductory infor-
95
The air conditioning system
Ð