Skoda Superb Owner's Manual page 15

Hide thumbs Also See for Superb:
Table of Contents

Advertisement

Switching over the memory using the button
screen wiper lever or using the adjustment wheel
ing wheel.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total-trip memory gathers data from any number of individual journeys up to
a total of 19 hours and 59 minutes driving or 1 999 kilometres driven, and on vehi-
cles which are fitted with an information display up to a total of 99 hours and
59 minutes driving or 9 999 kilometres driven. The memory is deleted when ei-
ther of these limits is reached and the calculation starts all over again.
Unlike the single-trip memory, the total-trip memory is not deleted after a period
of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
Operation
Fig. 6 Multifunction display: Control elements on the windscreen wiper lev-
er/control elements on the multifunction steering wheel
» Fig. 6
on page 13 on the wind-
B
on the multifunction steer-
D
ä
First read and observe the introductory information and safety warn-
ings
on page 12.
The rocker switch
» Fig. 6
and the button
A
wiper lever. Switching over and resetting is performed with the adjustment wheel
on the multifunction steering wheel.
D
Select memory
Press the button
» Fig. 6
B
Selecting functions using the windscreen wiper lever
Briefly press the rocker switch
functions of the multifunction display one after the other.
Selecting functions using the multifunction steering wheel
Press the button
» Fig. 6
C
Turn the adjustment wheel
al functions of the multifunction display one after the other.
Reseting
Select the desired memory.
Press and hold the button
B
The following readouts of the selected memory will be set to zero with the but-
ton
or
:
B
D
Ð
Average fuel consumption
Distance driven
Average speed
Driving time
Multifunction display details
ä
First read and observe the introductory information and safety warn-
ings
on page 12.
Outside temperature
The current outside temperature is shown in the display.
If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-
nal for ice on the road) appears before the temperature indicator and an audible
signal will sound. After pressing the rocker switch
windscreen wiper lever or the button
function shown last is indicated.
are located on the windscreen
B
or
.
D
» Fig. 6
up or down. This opens the individual
A
to open the menu of the multifunction display.
upwards or downwards. This opens the individu-
D
» Fig. 6
or
for a short while.
D
» Fig. 6
on page 13 at the
A
at the multifunction steering wheel, the
C
Instruments and Indicator Lights
Ð
£
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents