Dst Setting (Daytime Saving Time); Language Setting; Time Zone Settings - SkyScan 87800 Instruction Manual

TIME ZONE SETTING
After entering the manual setting mode as described above, the time zone can be set using the number of hours
different from Greenwich Mean Time (GMT) range in LCD2. To do this:
1. The time zone (LCD2) will start flashing (Default setting "-5h"). Select the desired time zone by pressing
and releasing the + key.
Note: The time zones from –4 to –10 hours will be displayed with 3 characters abbreviations:
 -4 ATL (Atlantic time),
 -5 EST (Eastern time; default time zone),
 -6 CST (Central time),
 -7 MST (Mountain time),
 -8 PST (Pacific time),
 -9 ALA (Alaska time),
 -10 HAW (Hawaii time).
 "GMT" will be displayed if set to GMT (0).
2. Press and release the SET key to enter the "DST Setting".
DST SETTING (daylight saving time)
1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the + key.
2. Press and release the SET key to enter the "Language Setting".
Note:
The DST default is "ON", meaning that the WWVB will automatically change the time according to Daylight
Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana)
turn the DST "OFF".

LANGUAGE SETTING

The weekdays can be displayed in LCD2 with the pre-set languages: English, French, Spanish and German.
US = English
F = French
E = Spanish (Espanol)
D = German (Deutsch)
1. Set the desired language for the weekday display in LCD 2 by use of the + key.
2. Press and release the SET key to enter the mode "Manual Time Setting".
5