RADIO CONTROLLED ANALOG CLOCK
Quick set up instructions
Welcome to the world of atomic timekeeping technology. We hope you will enjoy
the convenience of never having to set your clock again and the confidence of
knowing exactly what time it is
•
Insert 1
new
compartment
battery AA, LR6 1.5 V into the digital
•
Once the battery is installed, the clock will begin searching for a signal. For
the initial setting, it is recommended to stand the clock in an upright position
near a window. Within five minutes the clock will either receive the WWVB
signal and set itself to the exact time (for the default Pacific Time Zone), or it
will determine that the signal is not receivable at its current location and time
of day.
The clock will fast-forward the hands to the 4, 8, or 12 o'clock
position immediately and search for WWVB at specific time until a signal is
received.
If the time is manually set, the clock will continue to periodically
search for a signal and automatically reset the hands when the signal is
received.
•
Press time zone button to select a time zone after the clock received the
WWVB signal. If you are in the Pacific Time Zone- you are ready to hang
your clock.
If you are not in the Pacific Time Zone, select your time zone by press and
holding for 5 second, one of the four time zone buttons PT-Pacific Time, MT-
Mountain Time, CT-Central Time, ET-Eastern Time. If multiple buttons are
pressed, the clock will set to the time zone selected last. If no time zone is
selected the clock will default to Pacific Time. If you live in an area that
does not recognize DST (Arizona) you must press the (unmarked) DST
button for one second to deactivate your clock's DST program.
For time zones outside of PT, MT, CT or ET you must manually set the time
using the Manual Time set button on the back of the movement. (See
instructions below). Please Note: WWVB time will over ride a manual
setting.
INSTRUCTION MANUAL
Model 28800
.
AA, LR6 1.5 volt ALKALINE battery
according to the polarity marked on the case,
in the analog clock battery
clock.
1
®
then 1
new
Need help?
Do you have a question about the 28800 and is the answer not in the manual?
Questions and answers