SkyScan 80083 User Manual

SkyScan 80083 User Manual

Atomic clock with moving dots of seconds

Advertisement

Quick Links

MODEL 80083
Atomic Clock with Moving Dots of Seconds
The SkyScan ATOMIC Clock
With the SkyScan Atomic Clock, you have the most accurate timepiece within the
continent It can receive the time signal transmitted by the National Institute of Standards
and Technology (NIST), which is regulated by 3 atomic clocks and deviates less than 1
second within 3,000 years. The NIST broadcasts the time signal (WMIB, 60kHz)
continuously from Fort Collins, Colorado. This signal can be received anywhere in the
continental USA that long wave (AM) radio reception is possible with a portable radio. It
is expected that the signal can cover a distance of over 2,000 miles from the transmitter.
Therefore, your clock will receive the signal within the broadcast range anywhere an AM
signal can be received; generally the signal cannot be picked up in massive metal and
concrete structures unless near a window. In addition, some environmental effects (see
next page) may affect the transmitting distance.
For more information, please refer to the NIST WWVB WEB page at:
http://www.nist.gov

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 80083 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SkyScan 80083

  • Page 1 Atomic Clock with Moving Dots of Seconds The SkyScan ATOMIC Clock With the SkyScan Atomic Clock, you have the most accurate timepiece within the continent It can receive the time signal transmitted by the National Institute of Standards and Technology (NIST), which is regulated by 3 atomic clocks and deviates less than 1 second within 3,000 years.
  • Page 2 ENVIRONMENTAL RECEPTION EFFECTS: The SkyScan Atomic Clock obtains the accurate time with wireless technology. Same as all wireless devices, the receiving ability may be affected by, but not limited to, to the following circumstances: Long transmitting distance  Nearby mountains and valleys ...
  • Page 3 1. Synchronization signal reception can be received in Continental USA only. In other areas, you can still use this clock by setting the time manually. 2. Place your dock at a location with optimal signal, i.e.: close to a window away from metal surfaces or electrical appliances TO START THE CLOCK Remove the round battery cover at the rear of the case.
  • Page 4 TO SELECT TIME ZONE Slide the "Time Zone" switch to display the desired time zone:  EST (Eastern Standard Time)  CST (Central Standard Time)  MST (Mountain Standard Time)  PST (Pacific Standard Time)  Alaska (Alaska Standard time) ...
  • Page 5 CLOCK BATTERY REPLACEMENT When the display begins to look dim, it is time to replace the batteries in the clock. Remarks:  Do not mix old and new batteries  Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries.

Table of Contents

Save PDF