AJA kona3 Installation And Operation Manual page 57

KONA 3 Installation and Operation Manual — Using The KONA 3 Control
Secondary—when selected, this indicates that the SDI output is set to a format different from
the framebuffer (Primary Format). That secondary format value will be listed in green. This
shows that active processing of the video is taking place (format change and possibly even
up/down-conversion).
KONA 3 Control Panel, SDI Output Screen, Secondary
RGB (SMPTE or Full levels)—when selected, this indicates that both SDI outputs are being
used together to output a 4:4:4 dual-link signal from the KONA 3 card. The RGB Range
pulldown menu allows you to select either Full range (0-1023) or SMPTE range (typically 64-
940) for RGB color output.
KONA 3 Control Panel, SDI Output Screen, RGB 3GB
51
1