AJA kona3 Installation And Operation Manual page 24

18
connecting from the KONA card to the breakout box. The x4 BNC cable to 1.0/2.3
connectors cable that shipped with the card is also needed interconnect the SDI connectors
out of the card to the breakout box.
Installation Software CD
Read Me First Notice
and Registration Sheet
Standard Cable Set
RS422
Machine Control
(9-pin)
3 BNCs (Analog Out Connections):
In SD Can be Configured for
Component,
Composite,
or S-Video
In HD Can Only Be Component
Reference Input BNC
Audio Output XLRs
Channels 1-8
(2 channels/connector)
Audio Input XLRs
Channels 1-8
(2 channels/connector)
Contents, KONA 3 Shipping Box Contents
As you unpack the shipping box(es), carefully examine the contents. Ensure you received
everything and that nothing was damaged during shipment. If you find any damage,
immediately notify the shipping service and supply them with a complete description of
the damage. AJA will repair or replace damaged items. If you find shipping damage, contact
your AJA dealer or distributor for details on how to have your KONA 3 repaired or replaced.
Note: Save packing materials and the shipping box. If you ever require service or move
your system—use the packaging materials and box for safe shipment.
Installation and Operation Manual
in electronic form on the CD (PDF)
BNC/XLR-cable
SDI cable
SDI Out1/Link A BNC
SDI Out2/Link B BNC
SDI In1/Link A BNC
SDI In2/Link B BNC
AJA KONA 3
PCI-Express
Card
4-mini BNCs
to 4 standard
BNCs