Table of Contents
Advertisement
24
4. Connect two SDI cables between KONA 3 and your digital VTR (Digital Betacam etc.):
one from KONA 3 SDI In to the VTR SDI Out, and one from KONA 3 SDI Out (1 or 2) to
the VTR SDI In. The KONA 3 SDI connections have embedded audio (16-channels) so
the VTR must be configured accordingly. These connections will be made via the mini-
connectors-to-BNC cable or via the optional K3-Box.
5. If you have an AES/EBU-ready audio monitoring system, then connect the eight
channels of AES/EBU output from KONA 3's XLR (or BNC connectors-if using an
optional K3-Box): 1/2, 3/4, 5/6, and 7/8, to the monitoring system AES/EBU inputs. If
you instead have an analog audio monitoring system, you can use the two RCA-style
unbalanced stereo output jacks on the optional K3-Box for output.
Video Monitor
Component Video
3 BNCs (Analog Connections):
In HD Can Only Be Component
Optional
Genlock
Reference
(2 channels/connector)
AES/EBU Audio Out
to Monitor System
(2 channels/connector)
RS422
Machine Control
(9-pin)
Digital VTR with SDI Inputs
Typical System Connections
Workstation computer
Component,
Composite,
or S-Video
Reference Input BNC
LTC Output BNC
LTC Input BNC
Audio Input BNCs
Channels 1-8
Audio Output BNCs
Channels 1-8
SDI Out1/Link A BNC
SDI Out2/Link B BNC
SDI In1/Link A BNC
SDI In2/Link B BNC
SDI Video
with Embedded
Audio In/Out
Computer Monitor
External Storage
E E x x t t t e e r r
E
nal
nal
l
S
S S t t t o o r r age
age
AJA KONA 3G Card
HDMI Output cable
HBA for connection
of external storage
Installed
inside computer
4-mini BNCs
to 4 standard
BNCs
In 4K Mode all four
mini BNCs are Inputs or Outputs,
one for each Quandrant of the image
SDI Out1=Left top
SDI cable
SDI Out2=Right top
SDI Out 3=Left bottom
SDI Out 4=Right bottom
Advertisement
Table of Contents
