Table of Contents
Advertisement
40
Control Panel Screens—The side area of the AJA Control Panel provides different
information categorized by topics. Clicking on a topic—or a block diagram
element—displays an information screen corresponding to that topic. Screens that
can be selected are:
Screens available are:
Control: configures the default output (test pattern, pass through, desktop,etc.) plus
setting genlock and output timing.
Format: select the framebuffer primary video format, any secondary.
formats, and parameters of conversion for input/output.
Input Select: view and edit input selections and how they are mapped.
SDI Output: assign outputs to either Primary or Secondary formats.
Analog Output: configure the component/composite +Y/C analog output.
Video Setup: configures Video options such as composite black level.
Audio Setup: configures analog audio monitor level and delay.
Conversion: used to select codec options such as whether paused video appears as
a full frame or a single field (jitter shown or not shown) and 24 to 30 fps padding
patterns.
DS Keyer: select downstream keyer mode, specify a graphic file or matte.
Timecode: monitor RP-188 timecode and configure timecode window burn
output (Note: SMPTE 12M-2 is the updated name and specification for what was RP-
188)
Presets: add or delete saved preset configurations (handy for setting up the KONA
LHe for certain workflows and then saving it as a canned configuration for easy later
recall).
Info: displays status information about the KONA. This information is generally
intended for troubleshooting and support.
Advertisement
Table of Contents
