AJA kona3 Installation And Operation Manual page 51

KONA 3 Installation and Operation Manual — Using The KONA 3 Control
KONA 3 Formats include:
525i 23.98
525i 29.97
625i 25
720p 23.98
720p50
720p 59.94
720p 60
1080i 25
1080i 29.97
1080i 30
1080sf 23.98
1080sf 24
1080sf 25
1080sf 29.97
1080sf 30
Note: The AJA Control Panel software uses the abbreviation "sf" instead of "psf" when referring
to "progressive segmented frame" formats. In the manual and in other literature you may
see either of these acronyms used interchangeably. Visually it is easier to discern at a glance
if you are working with progressively segmented frame formats (sf in the Kona Control
Panel) as compared to progressive frame formats which will show only "p. "
cross-conversion: if you have an HD format as your primary and then select a secondary HD
format with a different frame size, the KONA 3 card will perform a cross-conversion where
necessary (input or output) for "like Hz" formats. By like Hz this means that 720P 59.94 may
be converted to 1080i 29.97 (59.94Hz). Converting from disparate Hz is not supported on
the KONA 3 card for cross-conversions. The example below shows 1080i to 720p.
KONA 3 Control Panel, Formats Screen Showing Cross-conversion, 1080i to 720p
1080p23.98
1080p24
1080p25
1080p29.97
1080p30
1080p50b
1080p59.94b
1080p60b
2K1080p23.98
2K1080p24
2K1080p25
2K1080sf23.98
2K1080sf24
2K1080sf25
2K1556sf14.98
2K1556sf15
2K1556sf23.98
2K1556sf24
2K1556sf25
45
1