Installing Kona Software For Windows - AJA kona3 Installation And Operation Manual

Installing KONA
Software for
Windows
KONA 3 Installation and Operation Guide — Installing KONA 3 Software
Final Installation Screen
13.Click the Restart button to complete the installation procedure. The system will perform
a software restart and be ready for use if firmware on the card is up to date.
If your PC has previously had another video capture or multimedia card installed, remove the
card and uninstall any related software before installing KONA. Also, always uninstall existing
KONA software before installing a new version. This will prevent hardware/software conflicts.
The installation procedure is described below. You cannot use KONA with third-party
applications until the AJA KONA software has been installed on the host workstation.
If you add KONA supported applications at a later date and have not previously installed the
appropriate plugins, you must run the install program again selecting the appropriate
application support software to be installed.
Software Installation Procedure
Locate the AJA KONA Software download or CD ROM packaged with your system and follow the
procedure below to install the required software on the host system. The KONA for PC software
is intended for Windows 7 64-bit workstations.
The KONA for PC 10.0 Installation Software is divided into separate installer packages
containing:
• Retail Drivers and Control Panel applications
•
Plugins for the various third-party applications supported.
The AJA Retail Software package must be installed first. Next, install the plugin package for your
desired Application Software.
KONA for PCRetail Drivers Installer Package
29
1