Accessories And Options - Fisher Minute Mount 2 system Owner's Manual

SnoFoil ASSEMBLY
®
A rigid curved extension attached to the top of
your snowplow blade defl ects light snow away
from the windshield. It improves your plowing
visibility and effi ciency. The SnoFoil assembly
bolts onto your existing blade and is available for
7-1/2', 8', 8-1/2', 9' and 10' straight blades.
Lit. No. 44224, Rev. 14

ACCESSORIES AND OPTIONS

31
STEEL DEFLECTOR
Keeps fl uffy snow from fl owing over the top of the
blade. It fi ts FISHER ® SD and HD series blades.
Easily installed and attractively priced.
RUBBER DEFLECTOR
Attaches to HT Series™, SD, HD, XBLADE™, MC,
XtremeV™ and XLS™ series blades. The fl exible
defl ector keeps fl uffy snow from fl owing over the
top of the blade. Easily installed and attractively
priced.
REPLACEABLE CARBON STEEL
CUTTING EDGE
These cutting edges are made of high carbon steel
and bolt onto the base angle for maximum blade
life. Steel cutting edges are available for HT Series,
SD, HD, XBLADE, MC, XtremeV and XLS series
blades. Depending on the blade series, cutting
edges are 3/8" or 1/2" thick, and 6" or 8" wide.
August 15, 2011