Infrared (Irda) Communication - M3 Mobile MC-6200S User Manual

117

Infrared (IrDA) Communication

When Infrared(IrDA)
communication does
operate
When a disconnection takes
place while transmitting files
Infrared(IrDA)
Communication
제어
Maintenance
M3 power management
M3 management
Data/file management
.
Arrange M3 and the IrDA ports of other devices. The
not distance should be no more than 1m.
Remove obstacles
communication between M3 and other devices.
Check out if M3 has IrDA OBEX communication protocol
installed. Without it, M3 cannot make a communication.
Communication can be interrupted while transmitting a
large size file.
communication first and try the file transfer again.
It is not possible to connect 3 or
simultaneously. Connection is only made between two
different devices.
After locating M3 in the right position, click Quick
Connection Icon> Infrared Sending/receiving Menu. Then
a program will find M3 to make a communication by itself
and display relevant data. Click the Connection Menu
then carry out necessary tasks.
Set up M3 to enter an automatic idle mode or to be
turned off when it is not in use.
Adjust the brightness of backlight to save power.
Avoid using M3 in a hot and humid environment.
To protect M3 from external impact, use leather
protection case.
Try not o expose M3 in direct sunlight.
While on long-term trip, backup data/files
Do regularly backup data/files.
that can possibly
In that case, disconnect
block the
the
4 devices