M3 Mobile MC-6200S User Manual page 10

10
LED status: LEDs show the current status of M3. LED signals present as follows:
Classification LED status
Red
Charge LED
Green
Flashing Blue
GSM/GPRS
Kept blue
status LED
Blue OFF
Scanner LED green
How to charge
Cradle: Insert the plug of the provided charger into the charge jack and place the terminal
onto the cradle.
Terminal: As the terminal‟s body has a built-in charge circuit, you can plug into the lower
part of the main body to charge while you are on a trip.
Charge LED
You can see the charge status from the upper left LED in the terminal or from the lower
right battery LED in the cradle.
Classification
Terminal charge LED
Cradle charge LED
(additional battery charge)
On charge
Charge completed
GSM/GPRS standby mode(Within a phone/internet accessible area)
GSM/GPRS communication mode (Voice, or internet in use).
GSM/GPRS turned off or out of coverage area
When the scanner reads barcodes.
LED Status
Red
Green
Red
Green
Description
Description
On charge
Charge completed
On charge
Charge completed