Table of Contents
Advertisement
To add the hub device driver:
1. Click Next.
2. Select Search for the best driver for your device.
3. Click Next.
4. Select Floppy disk drives.
5. Click Next.
6. Select The updated driver (Recommended).
7. Click Next twice.
8. Click Finish.
The Add New Hardware wizard window opens and displays a message that it
detects the IBM USB-Parallel Converter.
To add the IBM USB-Parallel converter device driver:
1. Click Next.
2. Select Search for the best driver for your device.
3. Click Next.
4. Select Floppy disk drives.
5. Click Next twice.
6. Click Finish.
The Add New Hardware wizard window opens and displays a message that it
detects a USB Human Interface Device.
To add the USB human interface device driver:
1. Click Next.
2. Select Search for the best driver for your device.
3. Click Next.
4. Select Floppy disk drives.
5. Click Next twice.
6. Click Finish.
The Add New Hardware wizard window opens and displays a message that it
detects the IBM USB Serial Converter.
To add the IBM USB serial converter device driver:
1. Click Next.
2. Select Search for the best driver for your device.
3. Click Next.
4. Click Floppy disk drives.
5. Click Next twice.
6. Click Finish.
If the Add New Hardware wizard window opens, complete the installation by
using the following instructions.
a. Click Next twice.
b. Click Finish.
Part 1: Installation and user's guide 1-3
Advertisement
Table of Contents
