Troubleshooting - Hunter Fan Installation And Operation Manual

TROUBLESHOOTING

PROBLEM
Nothing happens; fan does not move.
Noisy operation.
41343-01 7/1/2002 41343-01 6/12/2002
PROBABLE CAUSE
1. Power turned off, fuse blown, or
circuit breaker tripped.
2. Loose wire connections or wrong
connections.
3. Motor reversing switch not en-
gaged.
4. Pull chain switch not "on."
5. Shipping bumpers still in place.
1. Blade brackets screwed loosely to
motor.
2. Blade screwed loosely to blade iron.
3. Blade cracked.
SOLUTION
1. Turn power on, replace fuse, or
reset breaker.
2a. Loosen canopy, check all connections
according to STEP 4 - WIRING THE FAN
(turn power off before checking).
2b.Check the plug connection in the
switch housing according to STEP
7-ATTACHING THE
HOUSING.
3. Push switch firmly up or down.
4. Pull switch chain.
5. Remove shipping bumpers.
1. Tighten screws until snug.
2. Tighten screws until snug.
3. Replace all blades.
®
SWITCH
continued
27