Operating Your Hunter Fan - Hunter Fan Installation And Operation Manual

OPERATING YOUR HUNTER FAN

1. Turn on electrical power to the
fan.
2. The pull chain controls power to
the fan. The chain has four set-
tings in sequence: High, Medium,
Low and Off.
• Pull the chain slowly to change
settings.
• Release slowly to prevent the
chain from recoiling into the
blades.
• The chain uses a breakaway
connector that separates if the
chain is jerked. If this happens,
simply reinsert the chain into
the connector.
3. Ceiling fans work best by blow-
ing air downward (counterclock-
wise blade rotation) in warm
weather to cool the room with a
41343-01 41343-01 7/1/2002 6/12/2002
direct breeze. In winter, having
the fan draw air upward (clock-
wise blade rotation) will distrib-
ute the warmer air trapped at the
ceiling around the room without
causing a draft.
Figure 9a - Air Flow Patterns
To change the direction of air
flow, turn the fan off and let it
come to a complete stop. Slide
the reversing switch on the fan
to the opposite position as shown
in Figure 9b. Restart fan.
Pull
Chain
Figure 9b - Pull Chain and Reversing
Switch
4. If your fan wobbles when operat-
ing, use the enclosed balancing kit
and instructions to balance the
fan.
®
Reversing
Switch
25