Tx5 System Generation - Texas Instruments 990 User Manual

Constr uction and Acti vation
[] XMA
E XE CUT E
Ml-\.
CRO AS SE MB LE R
SOURCE ACCESS NAME: • INDSCDMM.NETGEN. SECnnnn
OBJECI' ACCESS NAME: .<user-specified filename>
LISTING ACCESS NAME: .<user-specified filename>
ERROR ACCESS NAME:
OPTICNS:
MACRO
LIBRARY
PATHNAME:
P
RINr
WI DTH: 80
PRINT LENGI'H:
80
The object file specified must then be included in the TX5 link
edi t control stream. The link control file must be edi ted to
include this object file or the secondary station communications
sof tware will not functi on correctly.
3 • 4. 5 TX 5 Sys t em Gene rat ion
The TX5 secondary operating system can be generated on a DXlO
system by executing the GENrX5 utility. Refer to the TX5
Operating 9,ystem
Programmer~s
Guide to become familiar with TX5
system generation.
Before reginning system generation, the user should be prepared
to incl ude the appropr i ate tas ks in the system. Determine tas k
labels, initial states, and priorities before starting. For a
secondary system that is to
be
downloaded from the primary
station, it is preferable to include user tasks with the TX5
system at this time and link those tasks with the TX5 system as
resident tas ks. These tas ks are then preprocessed and downloaded
alon9 wi th the TX5 operati n9 system. For further inf ormation and
examples of TX5 system generation, ref er to Appendix C.
3-36
2270526-9701