Texas Instruments 990 User Manual page 159

]lpp1 icati ons U til i ti es
5. 4. 3.13 Modi fy System Memory (MSM) Canmand.
The MSM command differs from the MM command only in the respect
that absolute addressing is used. A specified secondary address
and its contents is displayed on the interactive terminal where
the request was entered. If a change is requi red, the new val
ue
is entered followed by a RETURN (to move to the next location) or
a CMD (to exi t f rom the command). The prompts and example
res };X)n s es for the comm and ar e as f 011 ows :
<>
MSM
REIDTE IDDIFY SYSTEM MErvDRY
SECDNDARY I D: 1002
ADDRESS: >OlFE
01EE 5001
020C
OCD3
(example
res p:>ns es )
(press RETURN)
(press CMD)
The res};X)nses must conform to the fo110wi ng requi rements:
*
SECDNDARY I D. Enter the networ kID assi gned to the
remote SCI tas kin the desi red secondary station.
*
ADDRESS. This is the address of the location that is to
be changed and is abso1 ute, that is, ref erenced to
address O.
2270526-9701
5-37