Texas Instruments 990 User Manual page 148

Appl ications U til i ti es
*
LIS TING ACCESS NAME. Enter· a character str i ng
representing a valid device or file. Accepting the
default causes the listing to appear at the terminal
where the request was made.
*
CRU BASE. Enter a valid CRU base address for the
s econdar y st ati on •
*
DATA. Enter an integer value.
*
NUMBER CF BITS. Enter a num her from 0 through 15
(>F).
*
PARMI. Enter a number from 0 through 65535.
*
PARM2. Enter a number from 0 through 65535.
If an invalid res};X)nse is made to any prompt, an error message
appears
qn
the screen. For example, entering a task ID of
>FFF
causes the res};X)nse to
be
retained and the error message
INVAL ID TASK I D to appear. Similarly, enteri ng a val ue of 99999
in res};X)nse to a PARMI or PARM2 prompt causes the message
INVALID PARAMETER to appear.
The following paragraphs provide a detailed description of each
remote SCI command. They include example responses. and point to
appropriate error reIX>rting and recovery information. The remote
SCI commands are listed in al P-1abeti cal order (that is,
independent of the order in whi ch they appear in the menus).
Error messages associated with the commands are described in
Table 5-3.
5-26
2270526-9701